VIII. Card-Lock™
The LAN-Cell 2’s Card-Lock system provides a mechanism for securing the
PC-Card modem to prevent it from coming loose in mobile applications.
Simply insert a cable-tie through the two Card-Lock brackets above and below
the PC-Card slot (Figure 8) leaving enough slack to accommodate the portion of
the PC-Card that extends outside of the LAN-Cell. Rotate the loop toward the
front of the LAN-Cell (Figure 9).
Figure 8 Figure 9
Insert the PC-Card modem fully into the LAN-Cell, keeping the cable-tie loop
toward the front of the unit (Figure 10). Once the PC-Card is inserted, slide the
loop over the protruding end of the card and pull the bottom of the cable-tie
straight down to tighten the loop against the card. Then bring the bottom of the
cable-tie up to secure it with the cable-tie lock, tightening it against the PC-Card
(Figure 11).
You may also wish to lock the PC-Card’s external antenna “pig-tail” cable inside
the cable-tie loop to minimize movement of the antenna cable.
Figure 10 Figure 11
11
Comments to this Manuals