Proxicast LAN-Cell 2 User's Guide Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
The REALLY QUICK Start Guide
1. Power off the LAN-Cell 2. Insert an activated 3G Cellular PC-Card modem.
2. Power on the LAN-Cell 2. Wait 60 sec. for the PWR LED to stop flashing.
3. Connect a DHCP-enabled PC to one of the LAN ports.
4. Browse to http://192.168.1.1 Password is: 1234
5. Select Wireless > Cellular from the left side menu on the Home screen.
6. If required, enter your APN, PIN, Username, and Password.
7. Enter your ISP access phone number (#777 for CDMA, *99# for GSM) and
enable “Always On”.
8. Click Apply”.
The LAN-Cell will now attempt to initialize your 3G PC-Card modem and make a
connection to the Internet. Return to the Home screen to check the connection status.
If the card fails to fully initialize, power-cycle the LAN-Cell to reset the 3G modem
card. The LAN-Cell will make a cellular connection once it restarts.
I. Introducing the LAN-Cell 2
The LAN-Cell 2 is the most advanced and secure way to provide cellular Internet
access to Ethernet-based devices. Use the LAN-Cell 2 to provide access to remote
equipment, gather telemetry or other M2M data, establish Internet service in
temporary locations, or back-up Internet service with a cellular connection.
Beyond cellular Internet connectivity, the LAN-Cell 2 provides an integrated full-
featured IP router, 802.11 a/b/g access point, automatic WAN fail-over, policy-based
routing, bandwidth management, and special features to intelligently control your
cellular data costs and maximize up-time. Security features include a built-in IPsec
VPN client & server, 3DES & AES encryption, X.509 certificates, DMZ and VLAN
support, an SPI firewall and NAT/PAT services. The LAN-Cell’s platform independent
embedded web configurator makes setup easy and allows you to manage the
LAN-Cell from the LAN or remotely over the Internet with no software on your PC.
Figure 1: Typical LAN-Cell 2 Network Configuration
This guide covers the initial configuration needed to start using the LAN-Cell 2.
Please see the User’s Guide for more information on all of the LAN-Cell 2’s features.
Also refer to the included LAN-Cell 2 Documentation CD and Proxicast’s Support
Web Site (http://support.proxicast.com) for technical notes, application configuration
examples and knowledgebase articles.
1
Page view 1
1 2 3 4 5 6 7 ... 15 16

Comments to this Manuals

No comments