Proxicast LAN-Cell 2 User's Guide download pdf (Page 3)

Indicators & Connections

Figure 2: LAN-Cell 3 Front Panel

LABEL

LED STATE

DESCRIPTION

USB

MODEM

USB 2.0 port for 4G/3G USB modems only

USB

Flashing

USB modem is initializing

– or –

USB modem is not registered on the carrier network

– or –

There is no compatible cellular service available at the

current location

Solid

USB modem has made a connection & has been

assigned an IP address

Wi-Fi

Solid The LAN-Cell’s internal Wi-Fi radio is enabled

Solid An internal OS error has occurred

PWR

Solid Power is on

STAT

Flashing Power-on Self Test is in progress (approx. 60 sec)

Solid LAN-Cell is at normal operational status

WAN

Solid Link Status on the wired WAN Ethernet port

Flashing Data activity on the wired WAN Ethernet port

LAN 1-4

Solid Link Status on the corresponding LAN Ethernet port

Flashing Data activity on the corresponding LAN Ethernet port

EJECT

USB

Press & hold for 5 seconds and wait for LED to stop

flashing before removing a USB modem

RESET

Press & hold for 5 seconds until the STAT LED begins

to flash. Wait for STAT LED to stay on solid. This

returns the LAN-Cell to its default settings:

LAN IP = 192.168.1.1:8080

Username/Password = admin/1234

To prevent accidental resets, install the button cover

included with the Multi-Function Mounting Base

1 2 3 4 5 6 7 8 ... 11 12

Comments to this Manuals

No comments

Proxicast LAN-Cell 2 User's Guide Page 3

Comments to this Manuals

Related products and manuals for Networking Proxicast LAN-Cell 2