Proxicast LAN-Cell 2 User's Guide download pdf (Page 4)

Figure 3: LAN-Cell 3 Rear Panel

LABEL

DESCRIPTION

Wi-Fi (B)

Attach one of the supplied cylindrical Wi-Fi antennas to this

RP-SMA (reverse polarity) connector if using the LAN-Cell’s

integrated 802.11 b/g/n radio. If using only 1 antenna, use jack A.

LAN 1-4

(yellow)

Connect equipment to these ports with Ethernet cables. These ports

are auto-negotiating (supporting 10, 100, 1000 Mbps) and auto-

sensing (adjusts to the Ethernet cable type: straight-through vs.

cross-over).

WAN

(blue)

Connect a cable/DSL modem or other 10/100/1000 Ethernet-based

WAN equipment to this auto-sensing/auto-negotiating port.

PWR

Connect the included 12V DC power adapter to this jack. This is a

2.1mm center pin positive connector.

ON/OFF

Power Switch. To prevent accidental disengagement of the switch,

install the Power Switch cover included with the Multi-Function

Mounting Base

Wi-Fi (A)

Attach one of the supplied cylindrical Wi-Fi antennas to this

RP-SMA (reverse polarity) connector if using the LAN-Cell’s

integrated 802.11 b/g/n radio. If using only 1 antenna, use jack A.

Attaching other types of antennas (such antennas with standard SMA, TNC or FME

connectors) to this jack may damage the antennas and/or Wi-Fi antenna jack!

LAN-Cell 3 Default Settings

LAN-Cell’s LAN IP Address

192.168.1.1

HTTP Management Access

admin / 1234 on port 8080

LAN DHCP Server

192.168.1.33 to .65

Subnet mask 255.255.255.0

USB 4G/3G WAN

Auto Detect & Configure

Ethernet WAN

DHCP Client Enabled

Wi-Fi Access Point

Disabled

DNS Host Name

serial#.proxidns.com

Press the RESET button for 5 seconds to return the LAN-Cell to these settings.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Proxicast LAN-Cell 2 User's Guide Page 4

Comments to this Manuals

Related products and manuals for Networking Proxicast LAN-Cell 2