Proxicast LAN-Cell 2 User's Guide download pdf (Page 104)

100

101

Chapter 5 WAN & 3G Cellular Screens

LAN-Cell 2 User’s Guide

104

2 If your ISP dynamically assigns the DNS server IP addresses (along with the LAN-

Cell’s WAN IP address), set the DNS server fields to get the DNS server address from

the ISP.

3 You can manually enter the IP addresses of other DNS servers. These servers can be

public or private. A DNS server could even be behind a remote IPSec router (see Section

on page 308).

WAN MAC Address

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address

is assigned at the factory and consists of six pairs of hexadecimal characters, for example,

00:1B:39:00:00:02.

You can configure the WAN port's MAC address by either using the factory default or cloning

the MAC address from a computer on your LAN. Once it is successfully configured, the

address will be copied to the "rom" file (ProxiOS configuration file). It will not change unless

you change the setting or upload a different "rom" file.

5.3.1 WAN Ethernet Encapsulation

For ISPs (such as Telstra) that send UDP heartbeat packets to verify that the customer is still

online, please create a WAN-to-WAN/LAN-Cell firewall rule for those packets. Contact your

ISP to find the correct port number.

The screen shown next is for Ethernet encapsulation.

Table 26 Example of Network Properties for LAN Servers with Fixed IP Addresses

Choose an IP address 192.168.1.2-192.168.1.32; 192.168.1.65-192.168.1.254.

Subnet mask 255.255.255.0

Gateway (or default route) 192.168.1.1(LAN-Cell LAN IP)

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 649 650

Comments to this Manuals

No comments

Proxicast LAN-Cell 2 User's Guide Page 104

Comments to this Manuals