Proxicast LAN-Cell 2 User's Guide Page 53

  • Download
  • Add to my manuals
  • Print
  • Page
    / 650
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 52
LAN-Cell 2 User’s Guide
53
CHAPTER 3
Tutorials: 3G Modem Setup &
VPN Wizard
This chapter describes how to set up a 3G Cellular PC-Card modem WAN connection and
how to configure a basic VPN using the VPN Wizard and firewall security settings.
3.1 Setting Up a 3G WAN Connection
3.1.1 Inserting a 3G PC-Card
To enable and use the 3G WAN connection, you need to insert a 3G PC-Card in the LAN-Cell.
1 Turn the LAN-Cell off before you install or remove a 3G card.
1 After obtaining a 3G PC-Card modem from your cellular service provider, ensure that it
is properly configured and activated on their network by using the PC-Card in a
Windows laptop to make a 3G network connection. PC-Card firmware updates and
device activation must be done using the software tools provided by your carrier or the
PC-Card manufacturer.
1 Make sure the LAN-Cell is off before inserting or removing a card (to avoid damage).
2 Slide the connector end of the 3G card firmly and completely into the slot.
3 Power on the LAN-Cell.
" The LAN-Cell supports a specific list of 3G Cellular PC-Card modems
including devices for GSM, GPRS, EDGE, HSDPA, HSUPA, UMTS, CDMA,
1xRTT and EV-DO carrier networks worldwide. ExpressCard modems are
supported using a PC-Card to ExpressCard adapter cradle.
Refer to the firmware Release Notes or the Proxicast Support Web site for the
list of 3G PC-Cards supported in your firmware version. Support for additional
3G cards is being added continuously and may require a firmware upgrade.
Page view 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 649 650

Comments to this Manuals

No comments