Proxicast LAN-Cell 2 User's Guide download pdf (Page 171)

100

101

Chapter 8 Wi-Fi Screens

LAN-Cell 2 User’s Guide

171

The following table describes the labels in this screen.

8.3.1 No Security

" If you do not enable any wireless security on your LAN-Cell, your network is

accessible to any wireless networking device within range.

Figure 92 WIRELESS > Wi-Fi > Security: None

The following table describes the wireless LAN security labels in this screen.

8.3.2 Static WEP

Static WEP provides a mechanism for encrypting data using encryption keys. Both the AP and

the wireless stations must use the same WEP key to encrypt and decrypt data.

Your LAN-Cell allows you to configure up to four 64-bit, 128-bit or 152-bit WEP keys, but

only one key can be used at any one time.

Table 59 WIRELESS > Wi-Fi > Security

LABEL DESCRIPTION

Security Profile

Index This is the index number of the security profile.

Profile Name This field displays a name given to a security profile in the Security configuration

screen.

Security Mode This field displays the security mode this security profile uses.

Action Click the Edit icon to configure security settings for that profile.

Click the Reset Default icon to clear all user-entered configuration information and

return the security profile to its factory defaults.

Table 60 WIRELESS > Wi-Fi > Security: None

LABEL DESCRIPTION

Name Type a name (up to 32 printable 7-bit ASCII characters) to identify this security profile.

Security Mode Select None to allow wireless clients to communicate with the access points without

any data encryption.

Apply Click Apply to save your customized settings and exit this screen.

Cancel Click Cancel to exit this screen without saving.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 649 650

Comments to this Manuals

No comments

Proxicast LAN-Cell 2 User's Guide Page 171

Comments to this Manuals