Proxicast LAN-Cell 2 User's Guide download pdf (Page 285)

100

101

Chapter 12 Authentication Server Screens

LAN-Cell 2 User’s Guide

285

12.3 RADIUS Screen

Click SECURITY > AUTH SERVER > RADIUS to open the RADIUS screen. Configure

this screen to use an external RADIUS server to authenticate users.

Figure 172 SECURITY > AUTH SERVER > RADIUS

The following table describes the labels in this screen.

Table 104 SECURITY > AUTH SERVER > RADIUS

LABEL DESCRIPTION

Authentication Server

Active Select the check box to enable user authentication through an external

authentication server.

Clear the check box to enable user authentication using the local user profile

on the LAN-Cell.

Server IP Address Enter the IP address of the external authentication server in dotted decimal

notation.

Port Number The default port of the RADIUS server for authentication is 1812.

You need not change this value unless your network administrator instructs

you to do so with additional information.

Key Enter a password (up to 31 alphanumeric characters) as the key to be shared

between the external authentication server and the LAN-Cell.

The key is not sent over the network. This key must be the same on the

external authentication server and LAN-Cell.

Accounting Server

Active Select the check box to enable user accounting through an external

authentication server.

Server IP Address Enter the IP address of the external accounting server in dotted decimal

notation.

Port Number The default port of the RADIUS server for accounting is 1813.

You need not change this value unless your network administrator instructs

you to do so with additional information.

1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 649 650

Comments to this Manuals

No comments

Proxicast LAN-Cell 2 User's Guide Page 285

Comments to this Manuals