Proxicast LAN-Cell 2 User's Guide download pdf (Page 241)

100

101

Chapter 10 IPSec VPN Config Screens

LAN-Cell 2 User’s Guide

241

The hub router must have at least one separate VPN rule for each spoke. In the local IP

address, specify the IP addresses of the hub-and-spoke networks with which the spoke is to be

able to have a VPN tunnel. This may require you to use more than one VPN rule.

If you want to have the spoke routers access the Internet through the hub-and-spoke VPN

tunnel, set the VPN rules in the spoke routers to use 0.0.0.0 (any) as the remote IP address.

Make sure that your From VPN and To VPN firewall rules do not block the VPN packets.

10.10 VPN Troubleshooting

If the IPSec tunnel does not build properly, the problem is likely a configuration error at one of

the IPSec routers. Log into the web configurators of both IPSec routers.

Check the settings in each field methodically and slowly.

VPN Log

The system log can often help to identify a configuration problem.

Use the web configurator LOGS Log Settings screen to enable IKE and IPSec logging at both

ends, clear the log and then build the tunnel.

View the log via the web configurator LOGS View Log screen or type

sys log disp from

SMT Menu 24.8. See Section on page 381 for information on the log messages.

1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 649 650

Comments to this Manuals

No comments

Proxicast LAN-Cell 2 User's Guide Page 241

Comments to this Manuals